3M BEV165 Single Cartridge Cold Beverage Water Filtration System - 3 Micron Rating and 3.34 GPM

The BEV165 is a single-cartridge water filtration system from 3M that is specifically designed for high turbidity water applications to reduce sediment as well as chlorine taste and odor to improve the appearance, consistency, and taste of your cold beverages. The water filtration system also reduces abrasive hard particles that will help extend the life of pumps, valves, O-rings, and seals.

The cartridge design of this water filtration system is a Sanitary Quick Change (SQC) type that minimizes the possibility of leakage and contamination during cartridge change-outs with a simple 1/4 turn. The 1/2" FNPT horizontal inlet and outlet ports on water filtration system provide direct or easily adaptable connections to plumbing lines.

The BEV165 uses Integrated Membrane Pre-Activated Carbon Technology (IMPACT) media and has a 35,000 gallon capacity (133,000 liters) with a flow rate of up to 3.34 gallons per minute (12.6 liters per minute). The water filtration system has a 3.0-micron rating and an NSF Performance Data Sheet (PDS) is included.

3M BEV165 Features

• Application: High turbidity water
• System includes: pressure gauge, inlet water shut-off valve assembly, mounting bracket, and a single cartridge filter
• Integrated Membrane Pre-Activated Carbon Technology (IMPACT) media
• Sanitary Quick Change (SQC) cartridge design
• Automatic internal 1/4 turn shutoff valve
• Capacity: 35,000 gallons (133,000 liters)
• Flow rate: up to 3.34 gallons per minute (12.6 liters per minute)
• Micron rating: 3.0
• Maximum operating pressure: 125 psi (862 kPa)
• 1/2" FNPT horizontal inlet and outlet ports
• Filter cartridges: O-ring seal type
• Replacement cartridge: HF65 (3M part number 56134-07)

3M BEV165 Benefits

• Designed to reduce sediment as well as chlorine taste and odor
• NSF Performance Data Sheet (PDS) included
• NSF listed